How To Fix A Hoverboard - 7 Reasons

If you see that there is a problem with your hoverboard, then the first thing you must do is find the problem. Multiple problems usually occur with hoverboards. Some of the most common problems and their solution are explained below.

One of the most common issues that occur in hoverboards is the batteries. The batteries usually die, as it is a fact of life that nothing stays forever. A modern lithium-ion battery installed in many hoverboards lasts for almost 2 years. The only solution is to replace the battery with a new one.

Faulty Batterie


Another problem faced by many people is the charging of the hoverboard, their hoverboard stops to receive a charge. This problem occurs due to some default in the charging port. In this case, you will need to get the charging port replaced with a new one by a professional.

Charging Ports Broken 


As you know, for precise control of the hoverboards, balanced-based sensors or gyroscopes are installed in them. Sometimes the balance of the hoverboard gets disturbed and it happens because of some damage to the gyroscope. For solving it, you will need to get the gyroscope replaced by a professional.

Malfunctioning Of Sensor


Sometimes the hoverboard suddenly stops working or doesn’t work properly. It happens mostly because the wires inside the hoverboard get loose. In this case, you will need to remove the external casing using a screwdriver and then tighten the loose wires.

Loose Cable


If you are a daily rider of the hoverboard on rough surfaces then this problem can occur with your hoverboard. On riding daily on off-road pursuits the wheels and the motor installed in them get damaged. The only solution to this problem is to get the wheel and motors replaced.

Wheel Motors Issue


Most of the time, the hoverboard starts to beep without any reason and does not stop beeping. It usually happens when you don’t recalibrate your hoverboard for a long time. By beeping, it tells you that it needs to be recalibrated. The only solution to this is to recalibrate the hoverboard correctly.

Hoverboard Beeping Continuously 


If your hoverboard stops working after you rode it in the rain or any other place with water, then it would have got water in its motherboard. Make sure you instantly remove its motherboard and seep it into a bowl of rice for about 24 hours.

Water Damage


Hoverboards are a great way to transport and are used by many people, but they are sensitive devices and get damaged easily due to lack of maintenance. Many problems occur with hoverboards but some of the most common are explained here with solutions.