We know that hoverboards are electronic devices that can get damaged at any time. We suggest you buy a hoverboard that comes with at least one year warranty but still you have to take great care of its maintenance if you want it to last for a long time.
If your hoverboard gets damaged or stops working at any moment, you must learn how to fix a hoverboard. In this guide, we have explained some techniques and methods that will help you fix your hoverboard in no time. There wouldn’t be any need for an expert for this purpose, you are enough for it!
So, what are you waiting for then? Let’s move forward!
1. Reset the Device
Are you in search of finding a way to fix a hoverboard that won’t turn on, the most common and easiest way is to reset the hoverboard. It does not take much time to reset it as it will just consume a couple of minutes.
When you notice the hoverboard cannot move backward or forward, try resetting it. If it refuses to calibrate, you should try to eliminate its rear case. Then, re-insert the wires that are present inside the hoverboard. It is the time when you have to restart this device.
For this purpose you have to follow the following steps:
Step 1: Place the hoverboard in a flat place and then turn it off.
Step 2: Press the ON/OFF button present on the hoverboard for 10 seconds.
Step 3: Release the ON/OFF button when a small red circle appears on the hoverboard.
Step 4: Turn on the hoverboard when this red circle goes off.
2. Check Out the Wires
When you notice that your hoverboard has stopped working and restarting it is also not helping then you should check out the cables and wires present inside it. These wires might be loose due to which the hoverboard is not working.
You must learn how to fix a hoverboard that won’t move. For this purpose, you have to check out some important steps to follow that are mentioned below:
Step 1: First, remove the cover present on the hoverboard for its protection.
Step 2: Next, you have to remove the screws on this cover for opening up the hoverboard.
Note: Before opening the hoverboard, you must make sure that the hoverboard is turned off.
Step 3: After opening the hoverboard, you have to tighten all the cables and wires that are loosened.
Step 4: At last, you have to re-insert all the wires and close the hoverboard with the help of the screws.
3. Replace the Motor
When your hoverboard stops working, the defect in its motor might also be a reason behind it. So, if the motor is damaged, you should get it replaced. But first, you must get it checked by a professional to get it repaired but if repairing it isn’t possible, you must go to replace it with a new one.
You must be thinking how would I know that the motor of my hoverboard is damaged? Let us tell you when you notice that the red light on your hoverboard is blinking more than three times, it means its motor is damaged, and you must get it checked.
We suggest you hire an expert for replacing the motor instead of doing it yourself, especially when you do not have any knowledge about it!
4. Change its Battery
Do you want to know how to fix a hoverboard that won’t charge? If yes, then you must first know the reason why your hoverboard is not charging. We all know that when the hoverboard is not charged, it does not get started which means you are unable to ride it.
When you notice your hoverboard battery is not charging, you must check its charger first. If the charger is alright, you should check out its battery. No doubt, the battery of the hoverboard gets damaged if you do not take care of it.
If you notice that the light on your hoverboard is flashing more than six times, it means the lifetime of your battery is finished. It is the time when you have to replace it. We recommend you hire an expert to get it replaced with a new one!
Read also: Why is My Hoverboard Not Turning On
5. Shift the Pads
As we know there can be any problem with the hoverboard parts due to which it stops working. One of the major issues also includes an issue with the hoverboard pads i.e. the pads might be thumped due to which the hoverboard stops moving.
In this situation, the hoverboard is unable to recognize the owner’s steps that’s why it is unable to work properly. You must be thinking how can I resolve this issue? You do not need to worry about anything when we are here for you.
This issue can be resolved very easily just by following two to three simple steps. These steps have been mentioned below:
Step 1: First, you have to turn off your hoverboard.
Step 2: Next, you have to shift the pads your hoverboard is having.
Note: Make sure the pads are placed at the correct location.
Step 3: At last, you have to re-insert the pads and try riding the hoverboard. We hope the issue will be resolved.
6. Calibrate the Unit
We have learned many techniques and ways that involve the hardware parts of the hoverboards that need to be fixed if the hoverboard is not working. But let us tell you that you can also use some smart ways which involve the use of technology.
One of the smart ways to fix your hoverboard is by calibrating it. You can perform this task by following the steps mentioned below. Let’s have a look at them!
Step 1: First, you have to link your hoverboard with any of your smart devices such as a mobile phone, iPad, laptop, etc.
Step 2: The next step is to place your hoverboard on a flat surface.
Step 3: Next, you have to navigate to the Your Brand mobile application section and then tap on the Calibrate The Unit option.
Step 4: Then, you have to follow the instructions that appear on your screen.
Step 5: At last, you have to press the button for one minute and restart your hoverboard.
In this way, your hoverboard is calibrated successfully!
7. Fix the Sensors
If your hoverboard is not working, one of the common reasons is the issue with its sensors. Let us tell you that most hoverboards use gyroscopes and some other sensors that are balance based. These are the sensors that allow you to control the hoverboard while riding it.
No doubt, the sensors are smart tools that can get damaged easily with the passage of time especially when you do not take care of them or focus on their maintenance. Thus, you have to change these sensors with new ones if you want your hoverboard to work properly.
Let us tell you that the replacement procedure for these sensors or gyroscopes is difficult. That’s why we do not suggest you do it yourself without the help of an expert or his assistance. It would be best if you hire an expert or technician to replace them if you want it to get fixed effectively and efficiently!
8. Check the Internal Circuitry
We know that electronic devices get easily damaged when they get wet due to any reason, for example, the water can get inside the hoverboard due to rain, spitting water from the water bottle or some other source, etc. So, there can be any reason behind your hoverboard getting wet.
Here your task comes when you have to dry your hoverboard and all its parts to make it free from water droplets. It is because the motherboard can get damaged if the hoverboard is wet which does not let it work properly and makes it difficult for you to ride. You must check the internal circuitry immediately in this case.
If you want to fix it, you have to follow the steps that are mentioned below:
Step 1: First, you have to turn off this device before starting to fix it.
Step 2: The next step is to remove the motherboard from the hoverboard as well as the battery from it.
Step 3: Take a clean, dry and soft piece of cloth and clean all these components using it. It would be best if you leave them overnight, but if it doesn’t work, cleaning and drying these components yourself is the best option.
Step 4: If cleaning and drying these components is not helpful, you might have to get their replacement.
9. Replace the Hoverboard Wheel
If your hoverboard is not moving backward or forward, there might be an issue with its wheel. When you are done trying other ways to solve the issue of why your hoverboard is not working, the last thing to check is its wheel which might be stuck due to some reason.
We suggest you replace the wheel that is not balancing. You must be thinking that replacing a wheel is an easy task but there is nothing like that. You need to be an expert or hire an expert to undergo this task effectively.
It would be best if you buy a long-lasting and quality wheel when replacing your existing one. We suggest you get the one that offers a warranty of at least one to two years. The material of the wheel also matters a lot. Make sure you get the right-sized wheel where the size of the wheel can be determined by checking out the original one.
FAQs
How can you fix a hoverboard when it is not working?
The most common way to fix a hoverboard is by resetting it. You should also check out its internal circuitry if resetting the device is not helpful.
What common sensor is used in hoverboards?
Gyroscopes are used in hoverboards that might get damaged with the passage of time. You must get them checked when the hoverboard stops working.
How can you fix the internal wires of the hoverboard?
When you notice that your hoverboard is not moving backward or forward, you must check the wires that might be loosened. Open the hoverboard case, tighten the wires and close it. Try riding the hoverboard, hopefully, the issue will be fixed.
Is any technical knowledge required to fix a hoverboard?
If there is an issue with the motherboard, circuit, wheel, or any other hardware component of the hoverboard, you need technical knowledge to fix them. That’s why we suggest you hire an expert technician to get it fixed.
What do the red lights indicate on your hoverboard?
The red lights present on your hoverboard indicate the malfunctioning of your hoverboard such as broken motors, loose cables, faulty batteries, etc.
What should I do when my hoverboard battery is damaged?
If the hoverboard battery is damaged and cannot be repaired, you must get it replaced by a new one. It would be best if you get the help of an expert to replace this battery because it is a critical task that can not be performed by any ordinary person.
Conclusion
To sum up, there are a lot of methods and techniques that can be used for fixing a hoverboard. Every solution depends upon the reason behind the failure of the hoverboard. It means the solutions are suggested on the basis of the problems with the hoverboard.
We assure you all these methods have been tested by our experts so there is no risk in applying them or using them when needed. So, what are you waiting for then? Go and fix your damaged hoverboard if it is not working!
Top Recommendations
- Best Hoverboard for Teens
- 10 Best Hoverboard for Heavy Adults
- 10 Best Hoverboard for Teens
- 10 Best All Terrain Hoverboard
- Best Wrist Guards for Hoverboards
- Best Protective Hoverboard Skins & Case
